For some applications, it may be desirable to have the access
control system communicate alarms and events back to the DVR system in order to
record those events directly in the DVR database. However, it is not necessary
to perform any “hard wire” interconnection between the DVR and the Brivo Onair
control panel in order to support the integration features described in this
chapter.
If you do wish to connect the control panel directly to the DVR,
conventional integration techniques can be used to connect relay outputs from a
Brivo Onair control panel to the inputs on a DVR. See the Devices section of this manual for instructions on how to set up
output devices. See your DVR installation manual for information on how to
connect relays to the inputs of the DVR.
Related Topics