|
|
NOTE: These steps are only necessary if the camera
will be configured on a network that requires a static IP address; otherwise,
the cameras function as plug-and-play cameras. |
Connect the camera via an Ethernet cable.
Disconnect the computer from the wireless network in order to
manually configure the static IP to an address other than http://192.168.0.90, as that IP address is assigned to the camera
by default. For more information on how to manually configure a static IP
address, contact your Network Administrator.
Open your browser and type in the camera’s IP address: http://192.168.0.90. The camera’s main page opens. From this page
you can adjust the following:
Focus: allows you to view the camera’s
focus in order to determine whether or not the view is clear.
Network Settings: the network settings
default to “obtain IP address via DHCP;” for networks that require a static IP,
you must check the box “use the following IP address” and configure the
settings according to the information from your Network Administrator.